Aeotec Multipurpose Sensor was developed to detect open/close of door/windows, temperature, and vibration while it is connected to Aeotec Smart Home Hub. It is powered by Aeotec Zigbee technology.


Aeotec Multipurpose Sensor must be used with a Aeotec Smart Home Hub in order to work. The Aeotec works as Smart Home Hub user guide can be viewed at that link. 






Familiarize yourself with Aeotec Multipurpose Sensor


Package contents:

  1. Aeotec Multipurpose Sensor
  2. User manual
  3. Health and safety guide
  4. Magnetic ball mount
  5. 3M adhesive strips
  6. 1x CR2032 battery


Important safety information.

  • Read, keep, and follow these instructions. Heed all warnings.
  • Clean only with a dry cloth.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce hear.
  • Only use attachments and accessories specified by the Manufacturer.






Connect the Aeotec Multipurpose Sensor


Video.




Steps in SmartThings Connect.

  1. From the Home screen, tap the Plus (+) icon and select Device.
  2. Select Aeotec and then Multipurpose Sensor (IM6001-MPP).
  3. Tap Start.
  4. Choose a Hub for the device.
  5. Choose a Room for the device and tap Next.
  6. While the Hub searches:
    • Pull the “Remove when Connecting” tab found in the sensor.
    • Scan the code on the back of the device.






Using Aeotec Multipurpose Sensor


Aeotec Multipurpose Sensor is now a part of your Aeotec Smart Home Hub network. It will appear as an Open/Close widget that can display open/close status or temperature sensor readings. 


This section will go over how to display all information in your SmartThings Connect app.


Steps in SmartThings Connect.

  1. Open SmartThings Connect
  2. Scroll down to your Aeotec Multipurpose Sensor
  3. Then tap Aeotec Multipurpose Sensor widget.
  4. On this screen, it should display:
    • Open/Close 
    • Temperature


You may use Open/Close and Temperature sensor in an Automation to control your Aeotec Smart Home Hub home automation network. To learn more about programming automations, follow that link.





How to remove Aeotec Multipurpose Sensor from Aeotec Smart Home Hub


If your Aeotec Multipurpose Sensor is not performing as you expected, you'll likely need to reset your Multipurpose Sensor and remove it from Aeotec Smart Home Hub to begin a fresh start.


Steps


1. From the Home screen, select Menu 

2. Select More Options (3 dot icon)

3. Tap Edit

4. Tap Delete to confirm






Factory reset your Aeotec Multipurpose Sensor


Aeotec Multipurpose Sensor can be factory reset at any time if you come across any issues, or if you need to re-pair Aeotec Multipurpose Sensor to another hub.


Video.


Steps in SmartThings Connect.

  1. Press and Hold the recessed connect button for five (5) seconds.
  2. Release the button when the LED starts blinking red.
  3. The LED will blink red and green while attempting to connect.
  4. Use the SmartThings app and steps detailed in "Connect the Aeotec Multipurpose Sensor" above.




Next to: Aeotec Multipurpose Sensor technical specification